| Column Temperature Box |
Temperature Range |
RT+5℃-400℃ |
| Temperature Accuracy |
±0.1 ℃ |
| Temperature Programming |
9 steps |
| Program Total Time |
9999.9 min |
| Max Heating Rate |
60℃/min |
| Sample |
Temperature range |
RT+7℃~ 420 ℃ |
| Fill column, split/split sampler can be installed |
| Working under constant pressure mode |
| No more than three independent sampling systems are connected simultaneously |
| Detector |
Temperature Control |
Max. 420℃ |
| A maximum of 2 units are installed simultaneously. FID, TCD, ECD and FPD are optional. |
| Flow/pressure is displayed directly on the screen. |
| Hydrogen flame ionization detector (FID) |
High voltage switch control |
| Baseline signal display |
| Ignition coil control |
| Detection limit: ≤ 3×10-12 g/s |
| Sample: N-hexadecane (minimum detection quantity: 3pg/s) |
| Dynamic range: 107 |
| Thermal conductivity detector (TCD) |
Bridge voltage switch control |
| Bridge current setting: 0 ~ 220 mA |
| Sensitivity: 5000 mV•mL/mg |
| Dynamic range: 105 |
| Electronic capture detector (ECD) |
Radiation source: Ni63 |
| Detection limit: ≤8×10-14g/s |
| Sample: R 666 (minimum detection quantity: 80FG/s) |
| Dynamic range: 103 |
| Flame photometric detector (FPD) |
Temperature setting: Maximum 350℃ |
| Detection limit: ≤2×10-12 g/s (P) |
| ≤4×10-11 g/s (s) |
| Sample: Methyl parathion |
| Dynamic range: P 103 |
| Dynamic range: S 102 |
| Heating area |
In addition to the column box independent heating area, there are six heating areas. 2 injector heating zones, 2 detector heating zones and 2 auxiliary heating zones. |
| The maximum operating temperature of the auxiliary heating area can reach 400℃ |
| Basic Function |
Power Supply |
AC220V±10%, 50Hz |
| Shipping size(W×D×H)(mm) |
760x750x860 |
| N.W./G.W. (kg) |
64/86 |
Get Social